Browsing Category: "Repairs"

Getting the Details You Need before Hiring Professional Contractors

Your home is a haven in which you have every right to feel protected and safe. You do not want to allow just anyone to come into your house for any reason let alone to fix your kitchen appliances.

However, when your fridge, freezer, or counter top ice maker stops working, you may need to hire a contractor to come to your home and make the needed repairs. Before you hire a contractor for inspection, diagnostics, or same day refrigerator repair Miami homeowners like you can get the information you need to feel safe and confident by using the form online.

Everything in a Single Form

At first glance, the online form may not look comprehensive or detailed. It may look very basic in its layout and available space.

Still, if you look at the form, it provides you with everything you need to get the necessary details to hire a contractor with confidence. It starts by asking for your contact information including your name, address, email address, and phone number. These details are needed to verify if you are within the service map established by the company and close enough to send out a contractor the same day you ask for help

It also provides a space where you can ask basic questions or give a few details about what kinds of repairs you are needing for your appliances. For example, if you believe that the fridge is frozen, you may explain at what temperature it is set right now and what kind of noise it might be making.

Based on these facts, the company can send out the person best qualified to make the needed repairs. The service will also have a basic idea of what might be wrong with the appliance.

The company also gives you some helpful pointers on how to take care of the appliances in your kitchen before and after receiving repair services. You can save yourself time and trouble by putting your groceries away in a logical manner. You may want to avoid putting too many items inside each appliance to help keep the air flowing and allow the appliances to cool or freeze your food.

You also may want to check to make sure the doors stay closed tightly. These pointers can spare you from having to hire repair professionals to fix your appliances.

[ Tagged In ]

Ceiling Repair

The causes why the ceiling could be damaged are due to a combination of water and gravity. Water that drips onto a ceiling surface could get it way through. And when this happen it will leave stain on the surface. Gravity is the major problem if the one who made your roof used 1/8 inch drywall on ceilings or spaced joists too far apart. In the old days most builders used nails to fasten ceiling panels, which can lead into a problem since the weight of the panels tugs on the nails that will cause them to slip in.

If you would like to repair a damaged seam in a ceiling, cut back any loose joint tape until you reach to where it’s still well adhered. Tug the exposed seam with a 5 or 6 inch drywall knife to make the surface smooth and guide it closely to bare the drywall. Then scrape off any texture for 6 inches on both sides of the seam. You need to make sure that the panel edges are tightly fastened to the above framing to avoid any accident.

Fill the seam with the drywall compound using your 6 inches drywall knife, adding a 3 inch wide 1/8 inch thick layer of compound centered over the seam will complete the process. Ram a strip of paper joint tape into the compound, use a knife to make it smooth, flatten the tape by pressing it hard. Leave the joint to dry. Add two finish coats, then texture the surface so the part that was damaged and repair could not be too obvious.

 

[ Tagged In ] , , ,

5 of the Worst Places to Put Your Wine Cooler Unit

You finally made the investment in a nice wine cooler, but not being careful about placement can turn your investment into a large paperweight if you are not careful. Below are five areas to avoid when finding the perfect spot for your wine cooler.

Near Cooking Stoves

It is not recommended to place your wine cooler near any appliance that will be venting out, or creating a lot of heat. Your unit will have a hard time maintaining a cooler temperature and it will fluctuate.

Over a Heating Vent

You do not have to have the unit directly over the heating vent for an adverse reaction. Having it up on a counter with the vent below can be a bad idea. Your wine cooler will have to work harder to try and maintain a cool temperature when the heater is in use. It can burn out your unit quickly.

Near a Window

Once again, heat is the culprit when placing a wine cooler by a window that allows direct sunlight through. If you are looking for a constant, stable temperature, place it far from windows and doors that allow light exposure to the surface.

In a Damp Location

A basement, or unheated back room may put the unit out of your way, but areas that draw moisture can be a terrible spot for a wine cooler. The moisture will begin to corrode the surface and electrical components. Find a spot that maintains a nice ambient temperature year-round.

Heavy Traffic Area

Keeping a wine cooler on busy counters and near opening doors is a set-up for damage. Accidental damage from being knocked into by doors, or other heavy items can cause anything from minor dents and dings, to causing the unit to quit working. Find the perfect area of the counter that avoids the major traffic flow. Place it away from commonly used appliances like microwaves, blenders and coffee pots. It will last for many years in a calm and chaos-free environment.

Contact refrigeration experts like Sub Zero Repair Centers NYC for all of your Sub Zero wine cooler repair NYC needs today!

[ Tagged In ]

How The Professionals Unblock Drains

When you’ve called out a plumber or drain service expert in the past to unblock your drains you may have wondered just how they do it? Truth be told there is no definitive answer to the age old question of how to unblock a drain. In the majority of cases a plumber will know of a number of solutions to get the job done.

The drainage expert’s first task is to determine the cause of the problem. From there they can decide on the best course of action to alleviate the blockage. Most plumbers worth their salt will have a range of tools for any given situation. The blockage may call for a simple plunger or something more powerful such as a high-pressure water jet.

One set of equipment often used in attempt to unblock drains or sewers is drain rods. A drain rod is a series of interconnected stiff rods that provide flexibility due to the way in which they screw together end to end. These rods are often made from heavy-duty polypropylene, though more high-end rods are made from high tensile steel. The interconnectors are usually brass or steel, with cadmium plating to prevent corrosion.

The drain rod is inserted into the chamber where the blockage is suspected and manoeuvred to dislodge whatever it is that is causing the impasse. A vigorous back and forth manoeuvre or a clockwise twist is often used to clear the blockage.

Drainage emergencies are usually caused by fats from cooking, tree roots or leaves in outside drain systems. In more serious instances it may be that ground movement prompted by vehicles, subsidence or just age that cause a problem. All of these are easily fixable by a qualified engineer.

Related Posts Plugin for WordPress, Blogger... [ Tagged In ]